Hi,
When I look at the graphic showing the kw that goes to charge the battery and compare ir to the ones used the same day from the battery, there is a big difference. Alsmos doble power goes in that used from batteries.
Why is this?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
When I look at the graphic showing the kw that goes to charge the battery and compare ir to the ones used the same day from the battery, there is a big difference. Alsmos doble power goes in that used from batteries.
Why is this?
To help you we will need more information's than just two small diagrams.
What components do you have?
I have panels connected to an inversor of 3kw and a battery charger, a battery of 2,5kw also conected to the grid (no isolated)
Which information do you really need?
Hi Matthias, can you tell me which extra information do you need? The diagrams are a screenshoot of the VRM app looking at the amount of energy going into the battery one day and the energy used from the battery the same day (the battery was filled to 100% and discharged completely)
The energy you use immediately will not be used from the battery but directly from the sun.
I'm not talking about the energy used. The energy that the system says that goes into the battery is 5,95kwh while the use of the entire battery I can use only 3,11kwh
Additional resources still need to be added for this topic
25 People are following this question.