question

kmreel avatar image
kmreel asked

Testing Shore Power pass thru

I am in the process of a new install. I have wired up the system for Shore power. I have not yet connected batteries to the Victron Mulitplus but would like to test the AC portion of what I have connected so far. Is it OK to plug-in shore power and turn on the Victron to test the AC portion of the circuits without the batteries connected or will the Victron error out and not pass the AC.

shorepower
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kmreel avatar image
kmreel answered ·

Answered my own question. Yes I was able to test the system no problem.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic