good morning
I Have installed pheonix 12/500 model inverter.then i used to connect with victron connect application there i found charge detect option.what is the use of that option.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
good morning
I Have installed pheonix 12/500 model inverter.then i used to connect with victron connect application there i found charge detect option.what is the use of that option.
The Charge Detect setting is used to automatically reset the inverter after it has shut down due to low voltage 3 times consecutively. This value can be safely set just below the float charging voltage.
Here is what they say in the Victron manual (linked below):
29 People are following this question.