question

javiercamara avatar image
javiercamara asked

como puedo arrancar grupo electrogeno automatico cuando me quede sin carga en baterias

Lithium Battery
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
cquinones (Victron Energy Staff) avatar image
cquinones (Victron Energy Staff) answered ·

Hola Javier,

Basicamente tu generador se arrancará por contacto normalmente abierto , pues debes llevar esos cables al Multi/Quattro al relé Virtual switch .Usando el Mk3 y Ve configure debes programr las condiciones en la función "control de generador"

Sigue este link de ayuda https://www.victronenergy.com/live/auto-generator-start-stop:start?_ga=2.261279950.2131019414.1548667385-221578688.1524041376

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic