This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
If I have a couple of Quattros and a Venus device all connected via ve.bus, can I use the Venus device at the gateway to ve.bus for VE Configure? Or do I need to buy a dedicated USB to VE.bus adapter? Or perhaps VE Connect can do everything VE Configure can do, and I should use that?
VE.Connect cannot do VE.Bus devices just yet.
You cannot use VE.Configure through a Venus device - directly.
You CAN use Remote VE.Configure via your VRM site.
https://www.victronenergy.com/live/vrm_portal:remote-veconfigure
