Also, is specific programming required for the GX?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Also, is specific programming required for the GX?
Meanwhile, a year and a half later... I would also like an answer to this question. Not encouraged about my first time using the Victron community forum to find my exact question was asked almost 18 months ago and no answer from anyone.
Is it possible to connect the GTX12V315A CanBUS connector to a CerboGX?
Can anyone from Victron (or Lithionics) address this question?
@Jordanb Take a look at this link. This has details of which batteries are formally supported by Victron. If not on the list then I would make contact with Lithionics (who are unlikely to be monitoring this forum) and ask them what support if any they have for Victron.
I have done a quick search of teh web and found a YouTube video of someone that has integrated a Lithionics system with Victron, and a few PDF documents. It would seem that it is very dependant on which Lithionics batteries/BMS you go with.
Look in the modifications space under the current beta test v2.90 Venus OS, under the modifications currently being tested for RV-C it states the following so something may well be on the horizon
Page 70 of the Cerbo GX manual under the list of supported Devices in Venus v2.90 says "RV-C batteries: Lithionics is the only supported RV-C battery (including DVCC support)"
33 People are following this question.