I have a 712 and was wondering if a remotely switched relay could be installed which could be used to allow me to switch between reading the mid point voltage and the starter battery voltage.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a 712 and was wondering if a remotely switched relay could be installed which could be used to allow me to switch between reading the mid point voltage and the starter battery voltage.
I think this should be possible but you also have to switch the setting for the 2nd input each time.
Additional resources still need to be added for this topic
23 People are following this question.
VRM Battery history [ BMV-712 Smart] widget - "Time since last full charge" with wrong value
What happens when BMV712 sees charging beyond 100% SOC?
BMV 712 partially clear history data
bmv 712 wiring for 48v with mid point
BMV 712 not reseting SOC to 100% even after MPPT 15/75 has reached fully 100% SOC