This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, I have a 1200 Watt solar system connected to a victron smart solar 150/100. I'm standing in full summer heat but I only get 700-800 watts. Now I saw blue bulk light is blinking once every 3 seconds which means charging is disabled? But it's charging, just not how it should. I restarted the mppt and measured my solar input, its 120 volts how it should be. My lithium batterys are only 70%full which my bmv 712 is telling my solar over victron smart network. Anyone got a idea?
bulk blinking can also mean the rotary switch is set to 4 please download the Victron tool kit as its got all the flashing light options showing there.
now you also have not mentioned the voltage at that time as the regulator will also stop /lower its charging when the bulk voltage is at its bulk level (nothing to do with SOC reading). or the battery is full (measured by voltage setting in the reg),
SOC is a different figure thats shown in your battery monitor, normally this is reset to 100% when the voltage reaches the say 14.4 volts in the battery monitor (depending on your settings that is)
