question

brian-smith2 avatar image
brian-smith2 asked

IP22 12/30 (1) All LED flashing

Whilst plugged into 240v, all of the LED's at top flashing simultaneously. Not charging when in this state.

Night / Bulk / ABS / Float / Storage

Had to turn off power from mains to get it reset and charging again.

Can someone tell me what this means?

I can't find anything on LED codes online or in manuals

MPPT Controllersip22
1596260228076.png (340.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Can you connect to the charger with the VictronConnect app? What is shown there?

If I remember correctly the flashing of all LEDs means there is a short circuit detected on the output.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

brian-smith2 avatar image
brian-smith2 answered ·

Thanks Matthias, Yes i have it connected with VictronConnect app. I have looked around in there but cannot see anything helpful. Do you have a suggestion on where / what to look at in the app?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

A short circuit warning should appear directly on the main screen.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual