This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Smart Solar MPPT 150/70 -TR and want to install the SmartSolar MPPT Pluggable Display, but I can't get the black pugs in the mounting holes to come out. I was able to remove the head of one, but there is still something in the hole. The material is not soft rubber. Is there a trick to this?
Hi, had same experience.
In the end I left the black plugs as is, as you cannot get a screw through them, and just plugged the display in.
