question

gill43 avatar image
gill43 asked

Should power drain using a Victron Phoenix multiplus be showing on a Sterling battery monitor

Sterling PMP1 monitor recently fitted by boat yard. Just noticed that when using the inverter (Phoenix compact multiplus 12v 1600va 70A) with a small tool ~ 200W without any engine charging the Sterling unit does not register ay current draw. IS this because the monitor shunt has been installed in the wrong place or is there another reason.

Thanks

monitoring
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

Perhaps you should read the information. Sterling PMP1

Then contact your installer with your concerns.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic