question

nic-sama avatar image
nic-sama asked

Lynx Shunt 1000 with Lynx Distributor 1000

Hi

I've recently design a setup with 4 x 12V 200A Smart LiFePO4s in parallel connected directly to the Lynx Shunt 1000. The Lynx shunt is then coupled with a Lynx DC Distributor 1000 on its RHS. Connected to the Lynx DC Distributor is the Victron 12V 5kVA Quattro Inverter and DC loads.

Is it ok to connect the batteries directly to the Lynx Shunt 1000 and the fuse within the shunt can be used as circuit protection for the batteries?


Thanks


Nic


Lithium Batteryfuseslynx shunt
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Additional resources still need to be added for this topic

Battery Compatibility

Did You Know - How to create a battery profile for non-Victron batteries?

Additional resources still need to be added for this topic

Lynx Shunt VE Can online manual


Additional resources still need to be added for this topic

Fuses & fuse holders Product Page.


Additional resources still need to be added for this topic