I have ordered a 2021 Winnebago Minnie Winnie 26T and it comes with the Onan QG 4000. It does have a remote switch in the coach to turn on the generator.
I would like a wiring diagram to both the CCGX and to the new Cerbo GX. I am looking at the Cerbo/ Touch GX combination as an alternative to the CCGX. Ultimately I will go the direction of which one serves my purposes better and works easier with the Onan Auto Gen Start.
I will be using all Victron components:
150/100 MPPT VE. Can Solar Charger
10x95 Zamp Solar Panels
4x200ah Smart Lithium Batteries
Victron Battery Monitor
Either the 12/3000 Multi-plus Inverter charger or the 12/5000 Quatro
I am also looking at adding the SeaLevel II tank monitoring system. (if I go the Cerbo GX route I would like to use in in connection to this system using the NMEA2k connection)
This would all be connected to either the CCGX or the Cerbo/Touch GX.
Please advise on the wiring diagram for both and what parts are necessary to make this work. I will want to have the generator start and stop based on the state of charge parameters I set as well as time blocks during quite hours.
Thank you for anyone who can help me sort this all out.