replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

knauer asked Jul 15, '20

VE.Direct: DTR AND RTS high or OR?

Hey,

the FAQ

https://www.victronenergy.com/live/vedirect_protocol:faq#q2when_using_the_vedirect_to_rs232_interface_what_pins_do_i_need

says first "the DTR signal [...] and/or the RTS signal [...] must be driven high ". Three sentences later, it says "When one of those pins is not driven high, you will not be able to receive data!"

So, what is true: Must BOTH be high or is ONE of them enough?

VE.Direct

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

knauer commented · Jul 16, 2020 at 07:00 AM

Could someone of the staff please answer? This MUST be of Victrons knowledge and I consider this an error in the documentation, so as a customer I'd expect an answer.

0 ·