This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
Is there a small 100-200ah Lithium Battery I can use with the 12v Easy Solar that I won't require to program with a computer or the use of a VE.Bus BMS? I want to be able to just set everything up via the DIP switches and Rotary Dial.
Thanks,
Rhys
You may want to study this link
https://shop.pkys.com/Multiplus-dipswitches.html
in step two it shows a good guide around how to set the values for the corresponding charge states
These are the only values you can set here other than if you were to go further with a Ve.Bus Configuration.
So if looking for a Lithium:
1. Best get one that Still has it's own inbuilt BMS, i.e. won't allow Over or Under voltage
and
2. Also fits in with the voltage ranges in that table.
From My perspective though - Mk3-USB adaptor - is well worth the small expense, I used it initially for Programming, as well as using it connected to the Venus for Monitoring against my EasySolar 12/1600
