This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have just installed a Cerbo GX and touch screen. I have a Smartsolar 100/50 via VE cable, BMV712 via VE cable, Phoenix Smart 12/50 charger via VE cable and a ET112 via USB for inverter. On the main screen I cant see the charger. How do I select devices to see on the screen. In the menu I can see the charger and its output but it does not show on the main screen. I also don't need to see shore power.
Hi @sidewinder,
Unfortunately the Phoenix Smart 12/50 charger is not supported as a display on the overview screen.
There are a few supported customisations that can be done to the layout of the display, but they are done as part of a system configuration. For example enabling a grid meter in an ESS system will provide an additional AC side information, and enabling 'Has DC" will enable the calculated DC power display.
The AC input Shore/Grid/Generator box will remain blank if it is not used, but not disabled.
There is a little bit in the Cerbo GX manual about this, but I agree it could be expanded and clarified.
@Guy Stewart (Victron Community Manager) Hello, an additional question; can someone tell me if the phoenix smart charger IP43 is supported by the Cerbo GX? And if so, why doesn't it show up on the screen?
