question

locke avatar image
locke asked

Relais Modes BMV 700

Hello together,

i am really confused about the settings in the App about the relay modes.


1 Question:

What does mean the Relay Mode:(see Picture)

  1. Default
  2. Charger Mode
  3. Remote



2 Question:

Can i switch this relay on and off by manual setting ?



Thank you very much!

Best regards





BMV Battery Monitor
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

This is described in section 4.2.2 of the manual (on page 23).
Here is a link to the manual: https://www.victronenergy.com/upload/documents/Manual-BMV-700-700H-702-712-EN-NL-FR-DE-ES-SE.pdf

The REM setting allows manual control of the relay via the VE.Direct port, but this won't work if you are using the VE.Direct port already.
If you want to control the relay with the app, then you could adjust the relay parameters out of range and then simply use the "Invert relay" switch in the app if you have connectivity.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.