question

burnttech avatar image
burnttech asked

Use VE.Smart and VE.Direct at the same time

I'm looking at trying to build out a system that includes BT only and some that support VE.Direct cables. Is it possible to have a device(Venus or etc) to bridge both VE.Smart and VE.Direct to VRM?

VE.DirectVE.Smart Network
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

No.

For now VE.Smart and VE.direct are quite distinct, and there is no supported pathway to go from VE.Smart to VRM.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

burnttech avatar image burnttech commented ·

So if I have a boat with a BMV-712, is there a way to get the data to VRM that can be in the weather?

RV is an easier option since that will have a GX or GX Touch to send to VRM and the House would have GX or GX Touch too. Is it possible to Raspberry Pi to send BMV-712 to the VRM via bluetooth?

0 Likes 0 ·

Related Resources

VE.Direct protocol FAQ


Additional resources still need to be added for this topic

VE.Smart Networking Manual