2x 48/5000 multi s in parallel,gx bmv712
Is there a way of settting gen start for entering the night time period with fully charged battery? As well as set for overload and low battery ?
asked
Genset starting
I have programmed for low soc and overload, but I want to programme for if day hasn’t charged batteries upto 100 percent for gen to kick in and top up , so system hits night fully charged , am I missing another setting? I wondered about something off of relay on mppt example day/ night lighting...
May be you can use the testrun setting, but it will then run dayly.
In the Assistants programming I don't see any time related setting.
It does need a little more flexibility in the programming modes... victron!
@Matt drummond bell what about using the "periodic test run" feature, set daily, with a start time, and just set to "run until battery is fully charged"?
https://www.victronenergy.com/live/ccgx:generator_start_stop
Hi not a bad shout I will have a think about that! It’s a shame the street light setting on mppt doesn’t work the relay, I thought I could loop to multi and use genset relay on that to start on a seperate soc setting, then back to main genstarr on colour control, but no!! Lol
