question

david-123 avatar image
david-123 asked

Reset Multi-plus with dip switches How?

Is it possible to reset the multi-plus to stand alone by the dip switches.

When i connect the battery power and switch it on it brings up an overload, if i then change the dip switches to factory reset, and press the save button nothing happens.

Have i got the sequence wrong, or can this only be done by computer and the link?

MultiPlus Quattro Inverter Charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@David 123

The mk3 is your easiest option. You can run right through your dip switch settings again to reprogram all the way as well.

Unless you have a GX device you can't do it over the vrm

A software update will reset all settings. But you will also need the mk3 unless your dealership will do it for you as a courtesy.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

david-123 avatar image david-123 commented ·

Thanks Alexandra I will just have to buy a mk3 I have had these multi-plus's 15 years The master works fine on its own.

0 Likes 0 ·