Can I change charging voltage using the dip switches on Multiplus 24/3000? Thanks
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Can I change charging voltage using the dip switches on Multiplus 24/3000? Thanks
There is an EXCELLENT and extremely comprehensive article here by Peter Kennedy about using the dipswitches to program the multiplus that deserves more attention;
https://shop.pkys.com/Multiplus-dipswitches.html
His conclusion that one's time is better spent using the MK3-USB instead is also worthy of attention.
Thanks Guy. I appreciate your answer. Only just seen it. That's useful information. I'm a mac user so the MK3-USB is unfortunately not an option for me.
I don't know which Mac you are using but I have no problem using my MacBook Air (2013 version) with the MK3-USB. AF
Hi Allan, are you running MS windows on your mac in order to run the victron software ? Or has Victron released a mac version of the VE configure software ? Many thanks. I also have a Mac and thought I could not use the VE Configure software
Hi hansfab. I am running macOS Mojave 10.14.6 (no MS software anywhere except Office). VictronConnect works well. I use it to manage and monitor my SmartSolar MPPTs over BlueTooth and it worked well with the MK3-USB when I needed to tweak the config of my EasyPlus device. Allan
5 People are following this question.
victron quattro 24/8000 Relay program
Quattro 24/5000/120 with 240V split-phase input
Phoenix Multiplus 24/3000/17 Software version 1812144 connection problem with MK2.
Quattro 8kVA Demo - should I, shouldn't I?
Multiplus stays in absorbtion mode for over 12 hours with high voltage and 0 or low current