question

dilbert avatar image
dilbert asked

2 MPPT controllers with venus on Pi

I have 2 MPPT controllers 1 connected to a Pi using the Victron usb cable. Do I need another USB cable connected to the second MPPT to report the state of charge for that unit or will the VE smart Network synchronise the charge across the 2 units and report the overall state of the system?

Venus OSRaspberry PiVE.Smart Network
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

You'll need to connect it to the Pi with another VE.Direct cable.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Raspberry Pi running Victron’s Venus firmware - Blog Post

Venus OS Large image: Signal K and Node-RED - Install

raspberrypi install venus image


Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)


Additional resources still need to be added for this topic

VE.Smart Networking Manual