I have an orion switch mode dc/dc 24 to 12v 20a

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

mattcarr asked Jun 17, '20

when i apply 25 volts on the input I am only getting 8 volts out - any idea why this might be happening ?

Orion DC-DC Converters not smart

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-06-17T17:54:37Z

Mark answered · Jun 17, 2020 at 05:54 PM

Have you tried adjusting the output voltage potentiometer?........

00ccc18f-ce54-42db-b5ac-029a0d497772.jpeg (552.9 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2020-06-18T09:20:40Z

mattcarr answered · Jun 18, 2020 at 09:20 AM

My unit only has the input and output connectors - there is no potentiometer for me to adjust.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.