Good morning,
My sailboat has a REC-BMS and I've built an RS485/VE.direct interface unit that emulates a BMV602 so I can show the BMS measured current, voltage SOC on VRM and generate high/low voltages alarms at cell level rather than battery level however, Victron's very good 'BMV-60xS Text Protocol' document does not actually give an example of the serial output to ensure my format is 100% correct. Of many things, I am struggling with how the CRC is inserted and its format. I do own a BMV602 and two BMV712's but they are on my sailboat 370-miles away which is not so handy.
Be grateful if Victron or anybody else has captured this serial output would be prepared to share it.
Many thanks,
Ian.
SV-Gabrielle.