question

antonio-della-fiacca avatar image
antonio-della-fiacca asked

Temperature compensation on EasySolar with CCGX

Hi all,

I have installed EasySolar 48/3000/35-50 and I wonder can my system use battery temperature information from MultiPlus battery sensor for battery temperature compensation on it's MPPT 150/70 if I enable DVCC function on CCGX?

Thanks for your help.

temperature compensation
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Mark avatar image
Mark answered ·

Yes it can and it works well - just enable DVCC & STS.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

antonio-della-fiacca avatar image
antonio-della-fiacca answered ·

Thanks a lot Mark. I already did it. I've followed it remotely and I've also noticed that it works well. It is a bit strange that STS which uses Multi or Quattro temperature sensor was not described in TVCC manual, so I wanted to double check this with Victron community.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic