question

bbrouwer avatar image
bbrouwer asked

Can a Blue Smart IP22 connected to cerbo gx

Can a Blue Smart IP22 connected to cerbo gx. And read and dusplay the values

cerbo gxbluesmart ip22
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @BBrouwer

No it can not.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Stefan Adelbert avatar image Stefan Adelbert commented ·

This is a pretty big shame. Not necessarily as "smart" as it could be...

0 Likes 0 ·
sfenwick avatar image
sfenwick answered ·

Has this changed in the intervening years, since the IP22 BlueSmart chargers can communicate with devices like the SmartShunt for other functions (e.g. temperature monitoring)?

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

gerdverreycken avatar image gerdverreycken commented ·
The IP22 has an internal (on the pcb inside) VE-direct port as standard 2,54mm pin headers and gets recognized by a GX device if i'm not mistaken.
0 Likes 0 ·
Alexandra avatar image Alexandra ♦ gerdverreycken commented ·

@sfenwick

It can connect to the VE Smart network to use BMV and smart battery sense data. Check the manual under features.

0 Likes 0 ·