question

james avatar image
james asked

3 phase Microgrid with Fronius (AC and DC coupled) Output 2

I was wondering how the Output 2 on a Quattro or Multiplus 3 phase micro-grid with Fronius works. If the Fronius is on Output 1, how do the Victron inverters make Output 2 operate? Does it operate as it normally does in a normal three phase installation without Fronius?

AC PV CouplingFroniusinstallationac out 2
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
james-davy avatar image
james-davy answered ·

Just wondering if anyone is able to explain my previous question from May 28th to me? Excuse my ignorance if it is obvious please. On AC/DC coupled 3 phase Fronius Micro-grid with Victron i have only used the Fronius (Eco or Symo) on Output 1, would the wiring be the same in order to get Output 2 to work as well? How would Output 2 be made to operate as well? I have not tried this

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.