question

miya avatar image
miya asked

Venus GX with EasyPlus 1600 and BMV 702

Hi All

Help please...

I have a Venus GX - with BMV and EasyPlus 1600. All connected together by VE.Bus and VE.Direct. All working great - no issues.

My question is about temperature sensing. All 3 devices have a temperature sensor cable - which device, in this set up, should have the temp sensor attached ?

Thanks,

Tim

BMV Battery MonitorVenus GX - VGXTemperature SensorEasyPlus
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Miya,

you should use the temperature sensor that came with EasyPlus.

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

miya avatar image miya commented ·

Thanks Stefanie - and leave the others disconnected ?

0 Likes 0 ·
Stefanie (Victron Energy Staff) avatar image Stefanie (Victron Energy Staff) ♦♦ miya commented ·

Yes, just leave them disconnected.

0 Likes 0 ·
miya avatar image miya Stefanie (Victron Energy Staff) ♦♦ commented ·

Great - many thanks

0 Likes 0 ·

Related Resources

Victron temperature sensor disambiguation table - which product supports which sensor


Victron BMV battery monitors product page

Additional resources still need to be added for this topic

Venus GX manual

Venus GX product page