question

vic avatar image
vic asked

700BMV sync


Fitted a new BMV700 and I am trying to Synchronised it to my batteries bank , ( batteries are 4 Trojan 6v T125 ) .


The setting I have used are AH 450 , charge voltages 14.5 ,tail current 4.00% , charging time 3m , peukert 1.5, current threshold 0.10A, time to go 3m.


Has I use solar panels to charge I set the charging current to 14.5 Trojan give bulk at 14.8v .so it set to 0.3 lower.


Leaving the batteries on shore power over night ,

the SOC showed 100% .

since last full charge shows 0s .

But Synchronisation show 0.

What is it I am doing wrong ?


Also looking at my Victron MPPT it show bulk charge , surely if I am 100% SOC

14.2 voltages it show be on float and not bulk ?

BMV Battery Monitor
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi; look for the bmv video about synchronisation parameters in Youtube. As well as closely study the manual; it has a chapter about this

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic