SmartSolar Charger MPPT 150/85 software update

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

stefanpal asked May 25, '20

After the last software update (18/5) does the function where you can share and send statistics not work anymore.

When will a New fix be released?

MPPT Controllers software

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-05-25T08:43:41Z

Matthias Lange - DE answered · May 25, 2020 at 08:43 AM

Should be already fixed in the latest VictronConnect version 5.24.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2020-05-25T09:40:41Z

stefanpal answered · May 25, 2020 at 09:40 AM

It was when I updated the last firmvare on the SmartSolar Charger MPPT 150/85 it stopped to work

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE ♦ commented · May 25, 2020 at 10:46 AM

What version of VictronConnect do you have?
Within the last week VictronConnect was updated a few times.

v5.21 - 2020-05-18
v5.22 - 2020-05-18
v5.23 - 2020-05-22
v5.24 - 2020-05-22

Your problem was fixed in version 2.23.

0 ·

stefanpal Matthias Lange - DE ♦ commented · May 25, 2020 at 11:56 AM

Hi.

I see on my phone that I have v5.24 of the software.

I realized the problem after the required firmware update on the MPPT (performed by me on the 20/5).

I also tried it on the 22nd and 23rd but I'm not sure on what version that was on the phone then.

So I will check againg next weekend.

Thanks for the reply

0 ·