question

jerichorick avatar image
jerichorick asked

SmartShunt to Magnum Inverter communications.

I built a 12V battery bank for my RV using Nissan Leaf Gen 2 packs. I am using the SmartShunt to monitor the battery. The Bluetooth signal is too weak to reach my phone when I am in the coach. Is it possible to run a communications cable between the shunt and Magnum inverter so I can read some of the status of the shunt there? As of this moment I have to lay in the basement bay to read the Bluetooth signal.

Thanks for your help.

Rick

system design
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Justin Cook avatar image
Justin Cook answered ·

I've spoken to the OP about this issue already, but I'll post a direct answer here for posterity: No, this is not possible.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi, Magnum inverter? A six letter typo?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic