question

incog-nito avatar image
incog-nito asked

MultiPlus 12/800 Connected to a Raspberry Pi

I would like to connect a Multiplus 12/800 (new one) to a Raspberry Pi Venus.

What cable would I require?

Will only an Interface MK3-USB work or can I use a VE.Direct to USB interface cable?

Also, would I be able to connect a Smarsolar MPPT to the same RPi, using a VE.Direct to USB interface cable?

Venus OSRaspberry PiVE.DirectMK3
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

You would need an

MK3-USB to connect the Multi.

VE.Direct to USB to connect the SmartSolar.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

incog-nito avatar image incog-nito commented ·

Thank you Guy. Thought so, just wanted confirmation, before I ordered.


BTW, love your videos, - very detailed and thorough. You should make more.


0 Likes 0 ·

Related Resources

Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)

VE.Direct protocol FAQ

Additional resources still need to be added for this topic

Raspberry Pi running Victron’s Venus firmware - Blog Post

Venus OS Large image: Signal K and Node-RED - Install

raspberrypi install venus image


Additional resources still need to be added for this topic