question

peeew avatar image
peeew asked

Do I need to add a smart sense device?

I updated firmware on app and two smart controllers today, May 2020 and I want to synchronize the charging. Do I need to add a smart sense? If I do, is it best to install the smart sense partway down a 5 battery bank to allow for cable losses between batteries?

solar
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
mrseas avatar image
mrseas answered ·

What are you using as a battery monitor ?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

peeew avatar image
peeew answered ·

I am using a Balmar SG200 battery monitor that was previously installed. I ordered the smart sense after more reading. It seems this is needed to network my two controllers together.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic