G,day Everyone,
I'm in the process of upgrading my solar charging system in from a Epever Tracer to a Victron Smart Solar MPPT 100/50 controller and a Evpower BCU-NEV.
My system is 12V with no inverter or external charging option other than solar, I have 4 x 130Ah Winston LYP Cells 3.3V each and three 12V 150W solar panels, the largest power draw would be 15Ah at any one time.
Previously I had this system for 3 years with the Epever tracer just using Blade fuses to protect the system.
My Question is it Ok to use 63Ah/ 360V Noark Non Polarised Circuit Breakers instead of Fuses?
In the attached Diagram I have sketched out my wiring configuration and I would like peoples opinions on what I need to change to improve safety?
Cheers
Finn