question

logan avatar image
logan asked

Phoenix Inverter VE.Direct Remote ON/OFF Logic

Hi!

Is there any way to configure the remote on/off port to behave that when closed, the inverter is off and when open, the inverter is on (in reverse as factory default)?

There is plenty of configurations in the software but that one is lack of it.

Phoenix Inverter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

I don't think this is possible because this is a hardwired/hardcoded function.
The only thing you can do is to invert your signal with a relay.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.