This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I received the "lynx shunt 1000" without any documentation/installation instructions. Even after having looked through the Ion+Shunt manuals on the Victron website, I don't know how to use the provided two-core cable (red/black, green plug on one side ending together in one loop). Can you please explain on how to connect this device?
The red and black cable with the green plug supplied with the shunt is the temperature sensor,which bolts on to the negative battery terminal.
https://www.victronenergy.com/live/dc_distribution
