I am currently working with the Victron Quattro 48/10000/140-100/100 in three phase configuration. I power a couple of battery packs with this set up. The power assist mode of this set connects the input of the grid directly to the output unless when the input current has been exceeded then the battery starts to help.
This gives the problem that the earth leakage current protector gets triggered quite fast because by law its only allowed to be 30mA while the output is allowed to be 300mA.
The second problem is when the input voltage is 190v the output voltage is also 190v and some appliances don't work on that voltage. If we disconnect the input the output will change to 230v.
Is there any way to disconnect the input from the output and only charge the batteries with the input and output the power trough the inverter.