Dear Victron support,
I have set the BlueSolar PWM-Light to Load = battery following (mode C).
After the battery is <11.2V the load is disconnected, but when the battery is > 13.1 V its not automatically reconnected.
How is this possible?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Dear Victron support,
I have set the BlueSolar PWM-Light to Load = battery following (mode C).
After the battery is <11.2V the load is disconnected, but when the battery is > 13.1 V its not automatically reconnected.
How is this possible?
Additional resources still need to be added for this topic
Additional resources still need to be added for this topic
12 People are following this question.
Blue Smart IP65 and IP22 can be connected in parallel with another charger?
Can I connect a MPPT solar charger to the loss-free diode pair which are connected to the altenator?
Why is my Quattro sending 30.07 volts to my 24 v batteries???
Is it possible to connect two DC chargers in series to charge at a higher voltage?