question

assaf avatar image
assaf asked

Victron BMV-712 with Trojan MOTIVE 24-GEL configuration

Just installed the CTEK Offroad system on my 4X4 vehicle.

Connected the Victron BMV-712 to monitor only the AUX battery, a 77AMP Trojan MOTIVE 24-GEL.

What parameters should I use with the VictronConnect BMV app.

What value to set at the "Charged Voltage"?Trojan MOTIVE 24-GEL

Battery spec. shows Float Voltage (2.25 V/cell) 13.50 while "STATE OF CHARGE MEASURE OF OPEN-CIRCUIT VOLTAGE " is 12.84 for.

Should I configure the VictronConnect BMV app Charged Voltage to 13.5 or 12.84?

What should be set as "Floor" value? Trojan PDF claims for 11.84 as 0% battery?

Can anyone direct with other parameters to be set based on attached Trojan spec sheet?

VictronConnect
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources