I want to turn on a water heater when the SOC is between 85 and 100% and shut it off when it falls below the 85% value. i.e. I just want the relay to open when SOC is below 85%. Closed the rest of the time. I can make it work with 85-99% but that means when charge reaches 100 it goes open. The load is a small water heater and there is a lot of solar so even with the heater on it is not unusual to hit 100% Using a smart battery protect 65 as the relay. If can be done, what are the various setting on the BMV relay screen. The documentation is not very clear as to the behavior in various modes. Thanks