Good day all,
So living in South Africa, any amount of backfeed causes our utilities "Smart" meters contactor to trip and disconnect the utility grid.
I have 12x330W solar panels and 48V battery bank. Every now and then I did see some small backfeed even though the option to "Feed-in in excess solarcharger power" is disabled which tripped the utility meter and they had to come out and reset it in order for it to work again.
I setup in my ESS Grid set point to 60W just to have some kind of pull and I am not too happy to increase that further.
Very simple question - would installing ET112 Energy meter between the utility "Smart" meter and my Multiplus II prevent backfeed to the grid?