Is it possible to communicate a Fronius inverter with a Victron Control Color without having internet?. The Installation is a Rural Sector
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Is it possible to communicate a Fronius inverter with a Victron Control Color without having internet?. The Installation is a Rural Sector
The Fronius will communicate with the GX device without the need for an internet connection. Tne two devices however needs to be on the same LAN network. You need to change some settings on the GX to tell it exactly where the Fronius is connected in the system.
Best Regards
Riaan
Additional resources still need to be added for this topic
13 People are following this question.
1 Multiplus II 5000VA AC-coupled with Fronius Primo 4.0 on phase L1 on a 3-phase grid powered system
2 x Fronius Symo -> Zero Feedin not working on one Symo
3 phase Microgrid with Fronius (AC and DC coupled) Output 2
ESS, Fronius zero feed in and grid setpoint negative setpoint without draining batteries?