Is there some way for Victron to provide a custom charging cycle into the MultiPlus and Quattro software to better suit full 20 cell (24V) and 40 cell (48V) batteries? Currently the maximum charge current limits and charge voltage limits won't allow the battery to fully charge in a reasonable time.
The additional part of the question is on the Low Battery Voltage cutout limit. Current limits will not allow the charge to be fully utilised when necessary and is more set up to limit Lead Acid chemistry cells not excessively discharging. This is not necessary with NiFe cells as they're life is not negatively affected by depth of discharge.
Any knowledge of this having been done in the past or ways of seeking modification to the software by Victron would be appreciated.