question

egsust avatar image
egsust asked

Modify ramping restrictions for Mode 3 operation

Hi,


I'm currently using 3 multiplus in parallel connected to a BYD battery. The inverters are controlled with an external signal using Mode 3. So far, this arrangement works appropriately however I would like to improve the ramping capability of the inverters.

I know that previous firmware had unlimited ramping capabilities which have been restricted in the latest firmware versions. Is there any option to increase the ramping for charging and discharging the batteries?

I know the battery life can be reduced by doing so, however this is secondary for now.

Thanks

ESS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi; sorry but not that cannot be done.


Its not just battery life why there is ramping; also system stability and other reasons.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic