New 3kva multiplus connected and immediately starts indicating overload and battery low....what's the problem?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
New 3kva multiplus connected and immediately starts indicating overload and battery low....what's the problem?
Disconnect all AC wires and try again.
If the MultiPlus start operating normal, there is a problem with the connected AC load/wires (a short circuit maybe?!).
If the MultiPlus sill have the same problem, then unfortunately the Multi is defect and needs to be replaced.
14 People are following this question.