question

zenoc avatar image
zenoc asked

I want to use BMV 700 with Schaudt booster WA121525, how do i connect?

Hello,


I want to use the BMV 700 in combination with a battery booster from Schaudt. I have connected the booster according to the schematics from Schaudt.

Like this:

PastedGraphic-4.tiff


I only want to measure what goes in and out of my leisure battery.
So what is the best i do in combination with the monitor?
I put the Shunt between the leisure battery negative and the booster? like this:
Option 1:

PastedGraphic-2.tiff
Or i put the monitor between the booster and starter battery negative? But then the battery monitor will also measure what goes in and out of the starter battery no?

PastedGraphic-3.tiff


Or i do it like this?
Option3

PastedGraphic-1.tiff
BMV Battery Monitor
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
michaelvausr avatar image
michaelvausr answered ·

Hi Zenoc, I cannot see your schematics, sorry for that.
If you want to monitor the leisure batterie only, you have to connect the shunt between minus of the leisure battery and the rest of the system. Then you will see the leisure battery's data only. Take care of the direction of the shunt connection!

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.