question

balint603 avatar image
balint603 asked

Get AC output informations via CAN

Hi,
we are developing an aggregator including 3 Multiplus 48/5000. Our controller is able to communicate via the VE.Bus to VE.Can interface. Currently we can control the inverters and read system informations using proprietary message on the NMEA2000 but cannot get informations about the load because I could not find such VREGs. Which I do not really understand because these informations can be read in the case of other devices.
I would like to ask how I determine the output power, current and voltage data of each phase on the VE.Can.

Thanks,
Balint Major

Multiplus-IIVE.BusVE.CanNMEA 2000 - N2Kcommunication protocol
1585578231000.png (6.2 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers