question

jb-demolder avatar image
jb-demolder asked

Phoenix inverter 12/800 output Ac not working

Hello the community,

I got a new inverter Phoenix 800/12 working at 230V.

I have a really simple scheme : one battery, one inverter.

When I plug a 300w resistive load (baby cooker) it works perfectly. But if I plug a handtool (jigsaw) or another inductive load (150W or 350W) it doesn't work. Well, it's work for 3 secondes, and the red light comes for 30 secondes. I don't have Ve Bus direct, so I can't upload firmware ...


Do you think inverter is broken ? Thus, I don't have 700w resistive load to try, but I am sure it could work...

Many thanks for your help.

Jb

Phoenix Inverter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
harold avatar image
harold answered ·

Hi

2 thought from m side:

  • Could the starter current be too high?
  • Could the battery voltage drop too much with the load on?

Which red led turns on?

Harold

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.