I have a Phoenix 24|1200 model inverter 24v DC to 230v AC. The unit is telling me there is not enough voltage from the battery for it to work however I have 24 volts going in and can’t get it to clear the low voltage alarm.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Phoenix 24|1200 model inverter 24v DC to 230v AC. The unit is telling me there is not enough voltage from the battery for it to work however I have 24 volts going in and can’t get it to clear the low voltage alarm.
@Harry9898 What battery do you have? 24 Volts is low for most batteries. How are they receiving a charge?
For example a 12V lead acid battery should actually read 13.7V so if there are two connected in series you should have 27.4V. 24Volts would mean it is in a low State of Charge.
Additional resources still need to be added for this topic
13 People are following this question.