This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
System: 3x 5 kVa multiplus II in 3 phase, 2 current meters, 48 V lifepo4 battery, batrium BMS
I tested the system today, i flipped the main switch to disconnect from the grid. The appliences kept running, but while i thought the PV inverter would remain running, it switched off. I guess it has something to do with sync or so? Please some advise. It is not a must, but would love to keep this running in case of net failure...
AC PV inverters are supported, but require some configuration and proper system design to work correctly.
The first step is to read this AC PV document - https://www.victronenergy.com/live/ac_coupling:start
Do you have a system wiring diagram?
Who set the system up and did the configuration for the AC PV inverter?
